New Roof Installation for Lakeway Custom Homes

Projects We Handle in Lakeway

From ground-up custom homes to lakeside pavilions, Lakeway's builds demand installation expertise that matches the architecture.

Material Options for Lakeway New Construction

New construction means you choose exactly what goes on your roof. Your architecture, HOA requirements, and Lake Travis exposure should drive the decision.

Prices are per square foot of roof area, not home floor area. Lakeway's steep pitches mean roof area is significantly larger than floor area. Actual cost depends on pitch, complexity, and specific products. We provide detailed estimates for your project.

Do you work with custom builders in Lakeway?

Yes. We partner with custom builders and architects throughout Lakeway and the Lake Travis corridor. Most Lakeway construction is custom—not production—which means closer collaboration on material selection, timeline coordination around complex build schedules, and installation expertise on steep-pitch, multi-material roof designs. We've worked with builders across Rough Hollow, Lakeway Highlands, Serene Hills, Flintrock Falls, and individual lots throughout the area since 2008.

How much does new roof installation cost on a Lakeway custom home?

Lakeway custom homes have larger roof areas, steeper pitches, and more complex designs than production homes, which affects cost. Architectural shingles typically run $5-$8 per square foot of roof area. Standing seam metal runs $10-$18. Concrete or clay tile runs $12-$22+. A 3,000-4,500 sq ft Lakeway custom home might run $20,000-$40,000 for premium shingles, $35,000-$65,000 for metal, or $40,000-$80,000+ for tile. Multi-material installations (tile primary, metal accents) vary based on the design. We provide detailed estimates specific to your plans.

Can you install tile roofing on new construction?

Yes—tile installation on new construction is one of our specialties. When the framing is engineered for tile weight from the start, installation is straightforward and the roof performs optimally for 50-75+ years. We install concrete tile, clay tile, and flat tile profiles with proper mechanical fastening (not mortar-set), synthetic underlayment, and battens sized to the specific tile profile. Lakeway's Mediterranean, Tuscan, and Spanish Colonial architecture often demands tile, and we deliver it correctly.

Do we need HOA approval before choosing roofing materials?

In most Lakeway communities, yes. Rough Hollow, The Hills, Flintrock Falls, Tuscan Village, Lakeway Highlands, and other HOA-governed communities require architectural committee approval for materials, colors, and profiles before construction begins. We help builders and homeowners prepare compliant submissions with material samples, color selections, and product specifications. Getting approval before ordering materials prevents costly delays and changes mid-build.

How does Lake Travis wind exposure affect new roof installation?

Significantly. Lakefront lots, ridgeline properties, and exposed hillside sites experience sustained winds measurably stronger than sheltered inland locations. For tile, we use mechanical fastening with hurricane clips on perimeter tiles—not mortar-set, which fails in sustained wind. For shingles, we use six-nail enhanced fastening and high-wind-rated products. For metal, proper panel securement with concealed fasteners and thermal expansion allowances is critical. We assess your lot's specific exposure during the planning phase.

Can you handle multi-material roof installations?

Yes. Many Lakeway custom homes combine materials—tile on primary slopes, standing seam metal on accent roofs or covered entries, and modified bitumen or TPO on low-slope sections. Multi-material installations require precise transition detailing between different systems. Our crews are experienced with these complex designs and work closely with your architect to execute the roof exactly as designed.

How long does new roof installation take on a Lakeway custom home?

Lakeway custom homes take longer than production builds due to steeper pitches, heavier materials, and more complex designs. A shingle roof on a typical Lakeway custom home takes 3-5 days. Tile installation takes 5-10 days depending on size and complexity. Standing seam metal takes 4-8 days. Multi-material installations may take longer. Hillside lots with limited staging access can add time. We coordinate with your builder to minimize impact on the overall construction schedule.

Can you match existing tile for a Lakeway home addition?

This is one of the trickiest aspects of Lakeway additions. Many original tile profiles have been discontinued or the manufacturer has changed the color formula. We source matching or closely matching tiles when available. When an exact match isn't possible, we discuss options: using the closest available match, re-roofing the visible slopes alongside the addition for a unified look, or transitioning to a complementary material on the addition. Honest assessment upfront prevents surprises.

Do you install roofs on pool houses, outdoor kitchens, and pavilions?

Yes. Lakeway's outdoor living culture means we regularly install roofing on pool cabanas, outdoor kitchen pavilions, covered entertainment areas, and lakeside structures. Standing seam metal is popular for these applications—low maintenance, handles Lake Travis weather, and provides clean architectural lines. We also install tile or shingle roofing on outdoor structures when matching the main home's material.

What's included in a new construction roof installation?

Everything: decking inspection and coordination with framers, premium synthetic underlayment, ice and water shield in valleys and critical areas, drip edge on all edges, flashing at every penetration and wall transition, wind-rated fastening appropriate to your lot's exposure, balanced ventilation (ridge vents, soffit vents, calibrated to steep-pitch attic volumes), your chosen roofing material installed to manufacturer specifications, thorough cleanup, and complete warranty documentation.

Do you handle Travis County permits for new construction roofing?

We can pull roofing permits through the City of Lakeway and Travis County, or coordinate with your builder if they're pulling permits for the entire project. We're experienced with Lakeway and Travis County requirements—including any additional wind or fire rating requirements for properties near the wildland-urban interface along the lake.

What warranties do you offer on new installations in Lakeway?

Our new roof installations include manufacturer warranties on materials—25-50 years for shingles, 50-75 years for tile, 40-50 years for standing seam metal—plus our own 10-year workmanship warranty. As a GAF certified contractor, we offer enhanced warranty packages for shingle installations. For tile and metal, manufacturer warranties are typically non-prorated for the first 20-30 years. We've served the Austin area since 2008.